|
Want to get into power boat
racing? ,
What you need to do to get started.
Join an APBA Affiliated Club. You will find a list of those
in NSW on our website nswapba.com
Get an APBA license. Here you have some choices. Applications
for licenses are available for download from nswapba.com
- There is an introductory license called a NOVICE LICENSE.
This is available for a single meeting at the club level
- You may also obtain an APBA competition license. With
this you may compete at any event you are licensed for.
New competition licenses are issued as "provisional"
with this license you can compete at club events at any affiliated
club anywhere in Australia.
- To compete in Major days, Spectaculars and Championships
you will need a "full" competition license. Your
provisional license will be upgraded to s full competition
license after you have obtained endorsements from the officer
of the day at 3 events in less than 2 years. To maintain
this full status you must compete at 3 events over a 2 year
period.
- APBA competition license in NSW are divided into two sections,
one for the boat owner and one for the driver. If you are
driving a boat that is already covered by an APBA Boat Owner
membership, you will only need to buy a drivers license.
Other states may differ.
Naturally you will need to know the rules for the event you
are entering, and as laid down in the APBA rule book. You
will receive a copy of the rule book with your competition
license. Novice Licenses do not receive a rule book. And you
will be expected to make yourself aware of the course rules
for the venue you attend.
Some Safety gear.
- A helmet in good condition and brightly coloured.
- A life jacket suited for racing use. This must have leg
straps.
- Full coverage driving suit. As a minimum overalls are
acceptable.
- Full coverage footwear.
A Boat which has the following.
You do not need a dedicated race boat, a ski boat is what
most people start racing, some people will stay at club events
enjoying the camaraderie of regular competition and representing
your club against other clubs. Some people will go on to become
stars of the sport. Whatever you start with it will probably
need a few mods before being considered suitable for competition.
- An ignition cut out switch, which will shut off the motor
if you are thrown from your seat. These are similar to what
are used on jet skis and the like. Ask at your club if you
are not sure what is needed.
- A foot operated spring loaded accelerator pedal. A spring
just on the carby w\by itself is not satisfactory.
- Any ski pole MUST be removed for powerboat events.
- Steering cables are not to have any spring tensioners
in them.
- A securely mounted seat.
- Some kind of floatation as a minimum an inflated inner
tube tied up under the dash will usually do
- Everything in the boat must be securely held down so it
will not come loose.
- Check almost everything in the boat for wear or defects,
don't forget the underwater gear including the skeg and
propellor, because the club boat inspectors will not..
For any advice on these matters contact your club and they
will arrange to have someone inspect your boat and advise
you of any changes you need to make to meet the requirements.
Some classes have different requirements and outboards are
different to inboards.
How are license costs determined.
Your license fee is mostly used to pay for the insurance that
protects us all. Only a very small pert of the license costs
will be used for administration. The APBA is a non profit
body, and we exist for no other reason to foster power boat
racing events.
What next?
Get on the water and race!
Well its not that easy. Hurting down the river at 140 kilometer
per hour or more is one thing, doing the same thing with half
a dozen other boats sometimes a few inches away from you is
another. Especially in a corner
As a new driver you will be given an outside starting position,
or sometimes even behind the field. Watch the line drivers
take throughout the course and learn from it. As a newbie
don't try to get to involved until you are well aware of how
you boat handles in race conditions. Drive wide on corners
for your first few events, as your skill improves so will
your confidence, and after a while you will think nothing
of going gunwale to gunwale with other drivers.
Get as many races as you can. Handicap races are the go for
new drivers. In these slower boats go earlier than faster
boats and in theory everyone should finish in a nice neat
line, they don't though and this is where driver consistency
and skill pays off. This same consistency and skill is the
hallmark of a good driver in any area of the sport, from the
smallest juniors to the biggest unlimited.
Arrive nice and early, and make yourself known to the officer
of the day, or to the control tower who will advise you what
to do next. And who to see to have your boat inspected by
the club boat inspectors.
Your first racing experiences will be handicap events.
Speedboat handicaps are based on time.
You will first do some laps where you will be timed. It is
important to remember that these laps will be under different
conditions than an actual race. The water will not have other
boats wash all around the course, and in the corners you will
not be negotiating your way with several other boats. Maintain
a speed that you think you can duplicate under race conditions.
You will be given a time to start, which will be by a clock
on the control tower. It is important that you start right
on time. If you do your exact same time for the race but start
10 seconds late, its not going to do you much good, because
if you come in with the rest of the field, you will have gone
to fast (Breaking time) and will be disqualified. It is very
important that you cross the start line on time, the only
way to do this is practice.. Starting all over the place is
not the way to become a winner.
Remember above all safety is the first thing to consider
in any situation. If you feel it is becoming unsafe or your
skills are not up to it, slow down, don't close your eyes
and hope for the best.
|